we have develop RV1106 Based customized Board

Dear Team,

We are facing an eMMC initialization issue on the RV1106 board during normal boot, with the following error reported in the boot log:

mmc0: switch to bus width 8 failed

Although the firmware image is being flashed successfully to the eMMC in boot mode, the board encounters this issue during normal boot and waits for the root device /dev/mmcblk0p7.

please check the below log file and let me know how to solve the issue

3.326582] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 52000000Hz, actual 49500000HZ div = 0)
[ 3.331323] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 3.336923] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 3.365524] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 3.388741] ALSA device list:
[ 3.388771] #0: rv1106-acodec
[ 3.389095] Waiting for root device /dev/mmcblk0p7...
[ 3.397314] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 3.413896] mmc_host mmc2: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
[ 3.445417] mmc_host mmc1: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
[ 3.685394] mmc0: switch to bus width 8 failed

Regards,
Mahesh