构建。 调试。 部署。
面向瑞芯微 SoC、嵌入式 Linux、Android、AI、硬件设计与系统开发的实用工程资源。
热门 SoC
全部 SoC →4× Cortex-A76 up to 2.4 GHz + 4× Cortex-A55 up to 1.8 GHz
4× Cortex-A76 up to 2.4 GHz + 4× Cortex-A55 up to 1.8 GHz
4× Cortex-A72 up to 2.2 GHz + 4× Cortex-A53 up to 1.8 GHz
4× Cortex-A55 up to 2.0 GHz
4× Cortex-A55 up to 1.8 GHz
1× Cortex-A7 up to 1.2 GHz + RISC-V MCU
4× Cortex-A7 up to 1.5 GHz + RISC-V MCU
探索
最新工程指南
全部指南 →Android Kiosk Mode on Rockchip Devices (Lock Task, Device Owner, Boot to App)
Turn a Rockchip Android board into a single-purpose kiosk: device-owner provisioning, lock-task mode, booting straight into your app, and what to bake into the ROM instead.
Build Mainline U-Boot for Rockchip (RK3588, RK3568, RK3399)
Build a mainline U-Boot image with TF-A and the Rockchip DDR blob, then write it to SD, eMMC or SPI flash.
Build the Rockchip Linux Kernel (Vendor BSP and Mainline)
Cross-compile a Rockchip kernel on an x86 host, install the Image, DTB and modules, and know when to choose the vendor BSP or mainline.
Configure GPIO on Rockchip: Pin Numbering, Device Tree and libgpiod
Convert GPIO3_B5-style names to Linux line numbers, drive pins with libgpiod, and describe them properly in the device tree with pinctrl and overlays.
Convert YOLO to RKNN and Run It on the RK3588 NPU
Export YOLO to ONNX, quantise and convert it to .rknn with RKNN-Toolkit2 on an x86 host, then run it on the board with RKNN-Toolkit-Lite2, using all three RK3588 NPU cores.
Flash Any Rockchip Board with rkdeveloptool (Linux & macOS)
Build rkdeveloptool from source, set up udev permissions, and flash raw images, partitions and SPI flash on Rockchip boards.
硬件数据库
搜索与筛选开发板 →Radxa ROCK 5B
Radxa
- RAM4 / 8 / 16 / 32 GB LPDDR4X
- 以太网1× 2.5 GbE
- PCIeM.2 M-key PCIe 3.0 x4; M.2 E-key
Orange Pi 5 Plus
Shenzhen Xunlong (Orange Pi)
- RAM4 / 8 / 16 / 32 GB LPDDR4/4X
- 以太网2× 2.5 GbE
- PCIeM.2 M-key PCIe 3.0 x4; M.2 E-key
FriendlyElec NanoPC-T6
FriendlyElec
- RAM4 / 8 / 16 GB LPDDR4X
- 以太网2× 2.5 GbE
- PCIeM.2 M-key PCIe 3.0 x4; M.2 E-key; mini-PCIe (4G LTE)
Radxa CM5
Radxa
- RAM4 / 8 / 16 GB LPDDR4X
- 以太网Gigabit PHY on module
- PCIePCIe lanes routed to board-to-board connectors
Radxa ROCK 3A
Radxa
- RAM2 / 4 / 8 GB LPDDR4
- 以太网1× Gigabit
- PCIeM.2 M-key PCIe 3.0 x2; M.2 E-key
Luckfox Pico Max
Luckfox
- RAM256 MB DDR3L (in-package)
- 以太网1× 10/100
- PCIeNone
已经熟悉瑞芯微的设计与技术？
加入瑞芯微专家网络。平台上的新硬件、BSP、Android 与 AI 项目，我们会分享给匹配的工程师。